HowTo: Enabling Broadcom BCM4318 wireless on Linux Mint

After a HDD failure my wife asked for a Linux distribution (!) for her old HP dv5000 laptop. I picked Linux Mint due to its multimedia friendliness and restricted firmware support.

Funny enough it didn't attach a driver to the wireless chipset nor offered one through the restricted firmware pop-up.

lspci allowed me to identify the chipset, a Broadcom BCM4318 wireless device:

$ sudo lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:04.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

To fix the problem run the following commands:
$ sudo apt-get install b43-fwcutter
$ wget http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2
$ tar xf broadcom-wl-4.150.10.5.tar.bz2
$ cd broadcom-wl-4.150.10.5/driver/
$ sudo b43-fwcutter -w /lib/firmware/ wl_apsta_mimo.o
$ sudo modprobe b43
$ sudo echo "b43" >> /etc/modules

With this we've installed the proper driver and added it at boot time.

Bottom line: there's so much a pretty GUI can do ;)